Tips & Tutorials

1 minute reading time (53 words)

Roll Cage Installation ’87-‘93 Mustang Slide Show

If you are getting ready to install one of our Mustang '87-'93 Fox Body Hatchback/Notchback the slideshow below along with our installation instructions should get you through it with no trouble at all.
If you run into any trouble, don't hesitate to give us a call, txt or tweet!

Download the installation instructions here

  • 1 - Passenger side A-pillar bar with connecting roof and dash bar.

  • 2 - Complete view of both A-pillar bars with connecting roof and dash bars.

  • 3 - Driver's side A-pillar bar with connecting roof and dash bars.

  • 4 - Trunk bar meeting A-pillar bar at the main hoop on the passenger's side.

  • 5 - The main hoop support bar needs to be 3 ¼" away from the vertical structure under the seat.

  • 6 - Trunk bar meeting A-pillar bar at the main hoop on the driver's side.

  • 7 - Full cage view from behind without the seat and door bars.

  • 8 - Full cage view from behind without the seat and door bars.

  • 9 - Front view of A-pillar bars.

  • 10 - Complete view of both A-pillar bars with connecting roof bar, dash bar, and rear view mirror.

Congratulations to Forrest Roberts
Roll Cages Demystified

Contact Us